I had bought a daisy-chain type power supply for my pedals, and it worked pretty well.
It did hum quite a bit with a one pedal in particular though. But then it burned up, so that problem
solved itself pretty well. So,I cobbled together a power supply using a filament transformer and some *real*
filtering caps. I stuck it in this aluminum carcass temporarily.



It worked great, nice & quiet. So, a couple years later I decided to stuff it something a little smaller.
I bent some scrap aluminum I had left over, and made the ends from finished oak. I used the oak ends to
mount the transformer and little circuit board.



Circuit board. Plenty of room!



All tucked together.



Hey, it lights up!



Not a big project, but a satisfying one.